sysutils/sg3_utils 1.49 FreeBSD

Set of utilities that send SCSI commands to devices

System: FreeBSD
Repository: FreeBSD ports
Maintainer: [email protected]
Last update: 2026-07-25
Commit: efb2ff2684
License: BSD2CLAUSE, GPLv2+
Categories: sysutils
Package size: 867.7 KiB, 2398.2 KiB installed

Description

The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. Its functions are similar to camcontrol(8), but more powerful. For example, it can use SCSI Environmental Services not using FreeBSD ses(4), read SCSI device logs, and much more.

In the other systems

System

Port

Version

FreeBSD

sysutils/sg3_utils

1.49

MidnightBSD

sysutils/sg3_utils

1.48_1

Install

Binary package:

pkg install sg3_utils

From the ports tree:

cd /usr/ports/sysutils/sg3_utils/ && make install clean

To depend on this port in another port's Makefile:

RUN_DEPENDS=	sg3_utils>0:sysutils/sg3_utils
LIB_DEPENDS=	libsgutils2.so:sysutils/sg3_utils

Packages

The version each package repository carries. “-” means the repository builds no package of it, “n/a” that there is no such repository.

Repository

aarch64

amd64

armv6

armv7

i386

FreeBSD:14:latest

1.49

1.47

1.48_2

1.49

FreeBSD:14:quarterly

1.49

n/a

1.48_1

1.49

FreeBSD:15:latest

1.49

n/a

1.48_2

FreeBSD:15:quarterly

1.49

n/a

FreeBSD:16:latest

1.49

n/a

FreeBSD:16:quarterly

n/a

Dependencies

The Makefile names none itself; they come from USES and USE_*.

The full lists below include those, and their dependencies in turn.

Build dependencies 15

Required by 4

Configuration

No options to configure.

USES: cmake shebangfix tar:xz
Service scripts: none

Files

Manual pages 70

scsi_mandat(8)
scsi_readcap(8)
scsi_ready(8)
scsi_satl(8)
scsi_start(8)
scsi_stop(8)
scsi_temperature(8)
sg3_utils(8)
sg3_utils_json(8)
sg_bg_ctl(8)
sg_compare_and_write(8)
sg_decode_sense(8)
sg_format(8)
sg_get_config(8)
sg_get_elem_status(8)
sg_get_lba_status(8)
sg_ident(8)
sg_inq(8)
sg_logs(8)
sg_luns(8)
sg_modes(8)
sg_opcodes(8)
sg_persist(8)
sg_prevent(8)
sg_raw(8)
sg_rdac(8)
sg_read_attr(8)
sg_read_block_limits(8)
sg_read_buffer(8)
sg_read_long(8)
sg_readcap(8)
sg_reassign(8)
sg_referrals(8)
sg_rem_rest_elem(8)
sg_rep_density(8)
sg_rep_pip(8)
sg_rep_zones(8)
sg_requests(8)
sg_reset_wp(8)
sg_rmsn(8)
sg_rtpg(8)
sg_safte(8)
sg_sanitize(8)
sg_sat_datetime(8)
sg_sat_identify(8)
sg_sat_phy_event(8)
sg_sat_read_gplog(8)
sg_sat_set_features(8)
sg_seek(8)
sg_senddiag(8)
sg_ses(8)
sg_ses_microcode(8)
sg_start(8)
sg_stpg(8)
sg_stream_ctl(8)
sg_sync(8)
sg_timestamp(8)
sg_turs(8)
sg_unmap(8)
sg_verify(8)
sg_vpd(8)
sg_wr_mode(8)
sg_write_attr(8)
sg_write_buffer(8)
sg_write_long(8)
sg_write_same(8)
sg_write_verify(8)
sg_write_x(8)
sg_z_act_query(8)
sg_zone(8)

pkg-plist 155

bin/scsi_mandat
bin/scsi_readcap
bin/scsi_ready
bin/scsi_satl
bin/scsi_start
bin/scsi_stop
bin/scsi_temperature
bin/sg_bg_ctl
bin/sg_compare_and_write
bin/sg_decode_sense
bin/sg_format
bin/sg_get_config
bin/sg_get_elem_status
bin/sg_get_lba_status
bin/sg_ident
bin/sg_inq
bin/sg_logs
bin/sg_luns
bin/sg_modes
bin/sg_opcodes
bin/sg_persist
bin/sg_prevent
bin/sg_raw
bin/sg_rdac
bin/sg_read_attr
bin/sg_read_block_limits
bin/sg_read_buffer
bin/sg_read_long
bin/sg_readcap
bin/sg_reassign
bin/sg_referrals
bin/sg_rem_rest_elem
bin/sg_rep_density
bin/sg_rep_pip
bin/sg_rep_zones
bin/sg_requests
bin/sg_reset_wp
bin/sg_rmsn
bin/sg_rtpg
bin/sg_safte
bin/sg_sanitize
bin/sg_sat_datetime
bin/sg_sat_identify
bin/sg_sat_phy_event
bin/sg_sat_read_gplog
bin/sg_sat_set_features
bin/sg_seek
bin/sg_senddiag
bin/sg_ses
bin/sg_ses_microcode
bin/sg_start
bin/sg_stpg
bin/sg_stream_ctl
bin/sg_sync
bin/sg_timestamp
bin/sg_turs
bin/sg_unmap
bin/sg_verify
bin/sg_vpd
bin/sg_wr_mode
bin/sg_write_attr
bin/sg_write_buffer
bin/sg_write_long
bin/sg_write_same
bin/sg_write_verify
bin/sg_write_x
bin/sg_z_act_query
bin/sg_zone
include/scsi/sg_cmds.h
include/scsi/sg_cmds_basic.h
include/scsi/sg_cmds_extra.h
include/scsi/sg_cmds_mmc.h
include/scsi/sg_json.h
include/scsi/sg_json_sg_lib.h
include/scsi/sg_lib.h
include/scsi/sg_lib_data.h
include/scsi/sg_lib_names.h
include/scsi/sg_nvme.h
include/scsi/sg_pr2serr.h
include/scsi/sg_pt.h
include/scsi/sg_snt.h
include/scsi/sg_unaligned.h
lib/libsgutils2-.so.2
lib/libsgutils2-.so.2.0.0
lib/libsgutils2.so
share/man/man8/scsi_mandat.8.gz
share/man/man8/scsi_readcap.8.gz
share/man/man8/scsi_ready.8.gz
share/man/man8/scsi_satl.8.gz
share/man/man8/scsi_start.8.gz
share/man/man8/scsi_stop.8.gz
share/man/man8/scsi_temperature.8.gz
share/man/man8/sg3_utils.8.gz
share/man/man8/sg3_utils_json.8.gz
share/man/man8/sg_bg_ctl.8.gz
share/man/man8/sg_compare_and_write.8.gz
share/man/man8/sg_decode_sense.8.gz
share/man/man8/sg_format.8.gz
share/man/man8/sg_get_config.8.gz
share/man/man8/sg_get_elem_status.8.gz

The first 100 are listed.

distinfo 5

File

Size

SHA256

sg3_utils-1.49.tar.xz

991444

4215e7876e786dcdbf5ae14a7c0b9549b7817cdf6f5ce0debe1d1674e0d1c900

958434a1d2b5b2f4f465c9196c3c4ecf362eeb22.patch

1905

8e76e62fb7678c944e01a6974b34d215b032f76a0f959b14c30e134b9eadb37f

c32e19f52e7b5c75bd2a9b222c072eef16a4e583.patch

1154

d01df1983fff6bd8f41a9d12c176c6dda87da944b7b9e92772e43ff9615b9c38

c60834d53313f3796f43fdf874db98a9e8b03b6e.patch

1361

7519227ce02758bff519e8c207057fee28fdf3b42d8741b3876ef6e720d2d412

840637b1c402a02ea56a5447fb616200f5314a51.patch

1427

5c74346ed490f7b75c441d9284b2969de865f804885ee02b3c4f9fcba7e9587f

Master sites 1

https://sg.danny.cz/sg/p/

Commit history 1

Date Commit Credits Log message

2026-07-25

efb2ff2684

Alan Somers

sysutils/sg3_utils: 1.49

This is the first new release in three years. Among other changes, it updates sg_opcodes with features needed by CTL's ATF tests. Also, switch the build to cmake and take maintainership. Much thanks to diizzy for help with the patch. https://github.com/doug-gilbert/sg3_utils/blob/main/ChangeLog PR: 296938 Sponsored by: ConnectWise Approved by: diizzy (ports)