BSD Portssysutils/smartmontools 7.5_3 FreeBSD
S.M.A.R.T. disk monitoring tools
- System
- FreeBSD
- Repository
- FreeBSD ports
- Maintainer
- [email protected]
- Last update
- Commit
34337efb7a- License
- GPLv2+
- Categories
- sysutils
- Package size
- 584.1 KiB, 2049.2 KiB installed
Description
The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern SATA, NVMe and SCSI hard disks. It is derived from the smartsuite package, and includes support for ATA/ATAPI/SATA disks and SCSI disks and tape devices.
In the other systems
| System | Port | Version |
|---|---|---|
| FreeBSD | sysutils/smartmontools | 7.5_3 |
| OpenBSD | sysutils/smartmontools | 7.5 |
| NetBSD | sysutils/smartmontools | 7.4 |
| DragonFly | sysutils/smartmontools | 7.4_2 |
| MidnightBSD | sysutils/smartmontools | 7.5 |
Install
Binary package:
pkg install smartmontoolsFrom the ports tree:
cd /usr/ports/sysutils/smartmontools/ && make install cleanTo depend on this port in another port's Makefile:
RUN_DEPENDS= smartmontools>0:sysutils/smartmontoolsPackages
The version each package repository carries. “-” means the repository builds no package of it, “n/a” that there is no such repository.
| Repository | aarch64 | amd64 | armv6 | armv7 | i386 |
|---|---|---|---|---|---|
| FreeBSD:14:latest | 7.5_2 | 7.5_3 | 7.3 | 7.5 | 7.5_3 |
| FreeBSD:14:quarterly | 7.5_2 | 7.5_2 | n/a | 7.5 | 7.5_2 |
| FreeBSD:15:latest | 7.5_3 | 7.5_3 | n/a | 7.5 | 7.5 |
| FreeBSD:15:quarterly | 7.5_2 | 7.5_2 | n/a | n/a | n/a |
| FreeBSD:16:latest | 7.5_2 | 7.5_3 | n/a | n/a | n/a |
| FreeBSD:16:quarterly | n/a | n/a | n/a | n/a | n/a |
Dependencies
The Makefile names none itself; they come from USES and USE_*.
The full lists below include those, and their dependencies in turn.
Configuration
Options name: sysutils_smartmontools
| Option | Default | Description |
|---|---|---|
| DOCS | off | Build and/or install documentation |
- USES
- compiler:c++11-lib cpe
- Service scripts
smartd
Message after installing
smartmontools has been installed To check the status of drives, use the following: /usr/local/sbin/smartctl -a /dev/ad0 for first ATA/SATA drive /usr/local/sbin/smartctl -a /dev/da0 for first SCSI drive /usr/local/sbin/smartctl -a /dev/ada0 for first SATA drive To include drive health information in your daily status reports, add a line like the following to /etc/periodic.conf: daily_status_smart_devices="/dev/ad0 /dev/da0" substituting the appropriate device names for your SMART-capable disks. To enable drive monitoring, you can use /usr/local/sbin/smartd. A sample configuration file has been installed as /usr/local/etc/smartd.conf.sample Copy this file to /usr/local/etc/smartd.conf and edit appropriately To have smartd start at boot echo 'smartd_enable="YES"' >> /etc/rc.conf To enable verification of the drivedb updates, install the "security/gnupg" package.
Files
Manual pages 4
- smartctl(8)
- smartd(8)
- smartd.conf(5)
- update-smart-drivedb(8)
pkg-plist 12
- etc/periodic/daily/smart
- etc/smartd.conf.sample
- etc/smartd_warning.sh
- share/man/man5/smartd.conf.5.gz
- share/man/man8/smartd.8.gz
- share/man/man8/smartctl.8.gz
- share/man/man8/update-smart-drivedb.8.gz
- sbin/smartctl
- sbin/smartd
- sbin/update-smart-drivedb
- @sample share/smartmontools/drivedb.h.sample
- @dir etc/smartd_warning.d
distinfo 1
| File | Size | SHA256 |
|---|---|---|
| smartmontools-7.5.tar.gz | 1.122317e+06 | 690b83ca331378da9ea0d9d61008c4b22dde391387b9bbad7f29387f2595f76e |
Master sites 1
- SF